Die cut 3M Adhesive Tape
It has a very high level of initial tack and good adhesion to a wide variety of sufaces including LSE materials.
1.Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better pressure develops better adhesive contact & thus improves bond strength.
2.To obtain optimum adhesion,the bonding surfaces must be clean dry and well unified. A typical surface cleaning solvent is isopropyl alcohol & water. Use proper safety precautions for handling solvents.
3.Ideal tape application temperatures range is 21oC to 38oC(70°F to 100°F). Initial tape application to surfaces at temperatures below 10oC(50°F) is not recommended because the adhesive becomes too firm to adhere readily. However once properly applied low temperature holding is generally satisfactory.
It is well suited to bonding together a wide variety of similar and dissimilar materials such as wood,metals,glass,papers,paints,and many plastices and fabrics.
It shows a high level of adhesion to Lse materials such as Polypropylene and some Polyethylenes as well as coated papers and varnishes.